Source Audio ZIO Analog Bass Preamp+DI
The ZIO Analog Bass Preamp + DI is an ultra-low noise, all-analog preamp and DI
for bass guitar. The pedal offers maximum headroom and a simple but flexible set of
tone shaping controls. ZIO Bass can be used as a direct input using the balanced XLR
output for connection to a mixer or audio interface as well as with headphones through
its dedicated headphone jack.
The ZIO Bass features a simple control panel. The OUTPUT knob offers +12db of additional boost plus a significant amount of cut. The
BASS and FOCUS controls work best in tandem – use the BASS knob to increase low-end output and the FOCUS knob (which adjusts
the cut-off point of a high-pass filter) to eliminated excessive lows and create added punch. The TREBLE knob boosts or cuts the high
frequencies, providing enhanced articulation without adding harshness.
The GRIT toggle enables a mild distortion to mimic the transformer-style breakup from high-end bass amps. GRIT mode’s gain level
can be adjusted for more or less distortion with the GAIN control located on the side of the pedal. The SCOOP toggle engages a special
midrange cut to clean up “muddy” mid-range frequencies. The SCOOP profile is based on the “Pultec Trick” – a setting commonly used
with vintage Pultec Equalizers to add clarity.
The pedal has three outputs that can be used individually or simultaneously. The OUTPUT jack connects to an amplifier or pedalboard.
The DIRECT OUT is a balanced XLR output that sounds great running into a mixer or audio interface for recording or live sound
applications. The HEADPHONE jack features a high dynamic range, low-noise amplifier that is capable of driving low impedance studio
headphones.
Specs:
• Preamp and DI effects pedal for Bass Guitar
• All-analog ultra-low noise and distortion preamp
• +/-12V high voltage rails for active and passive basses
• Full tone-shaping control set with FOCUS high pass filter
• GRIT and SCOOP modes for added tonal character options
• Balanced XLR Direct Output with optional ground lift
• Headphone output for direct monitoring
• True Bypass Switching
• Powered by (included) 9V DC power supply
(2,1 mm plug, center -, 200 mA current draw)